Replacement Tips

Replace old or lost tips with these items. Replacement tips for Firestik (KW Series) and Firestik II (FS Series) antennas 

$3.95
2-Notch Pill Strips

Price is per pill strip

Picture is for reference purposes only

$0.49
16 Notch Pill Strip

Price is per pill strip

Picture is for reference purposes only

$3.92
Power Strip 1' Length

Each Power Strip is 1' in length (12 inches)
Width my vary  +/- 10% 

They are available in different thicknesses such as 1/2" wide, 5/8" wide, 3/4" wide and 1" wide.

Picture is for reference purposes only

Actual Product May Vary

from $1.01
Drill bit for pill holes

General Purpose

High Speed

118 Degree Point

M-2 Steel

Wire Gauge

Straight Shank

Jobber Length

Picture is for reference purposes only

Actual Product May Vary

$3.00
1-5/16in Plastic Instrument Knob

Diameter: 1-5/16"
Shaft Size: 1/4"
Height: 5/8"
Set Screws: Single
Description: Black Phenolic Skirted knob with White line Indicator, brass insert and Spun Aluminum Inlay.
DIA: 1-5/16" H: 5/8" WT: .027

Picture is for reference purposes only

$3.25
Nylon Grommets

Eliminates wire abrasion caused by metal panel cutouts.

Picture is for reference purposes only

Actual Product May Vary

from $0.22
Strain Relief Cord Connector

Please select size.

Type Wire Size Item Fits Size of Cabinet Hole Product Fits

2650 .181”-.312” .596

2652 .230”-.395” .726

2653 .170”-.450” .798

2654 .230”-.546” .883

2656 .450”-.709” 1.10

2659 .590”-.990” 1.44

3651 .064”-.210” .464

3656 .250”-.485” 1.10

Picture is for reference purposes only

Actual Product May Vary

from $2.05
Nickle-Plated Snap-in Plugs

Used to fill in an unwanted hole on a cabinet

Picture is for reference purposes only

Actual Product May Vary

from $0.97
Mono 1/4" Jack

Picture is for reference purposes only

Actual Product May Vary

$1.69
Stereo 1/4" Jack

Picture is for reference purposes only

Actual Product May Vary

$1.75
Replacement 3/8 -24 Stud

18-8 Stainless Steel

Fits most mounts and antennas.

$3.00
Blank Plate

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Description Dimensions: 8" x 8"
Thickness: .063"

$10.50
Quick Disconnect

3/8” x 24 Thread on both ends

MO-203- 3” Long

MO-204-4 “ Long

from $55.00
Fatboy Puck #3 Antenna Mount

Includes three 1/4 - 20 Mounting screws and one solid aluminum puck
3/8 - 24 Thread
Fits 95% of all antennas
Mounts permantly to the grounded surface of vehicle
Uses a UHF=259 Coax for a simple screw on/off
Recommended for 7.5 kV or less
Requires one 1 5/8 hole minimum and three 1/4 screw holes

$81.00
Out of Stock
Fatboy Puck#3 (Brass Swivel Quick Disconnect Mount)

Includes the Fatboy #3 Puck
For use with correcting your non-level angles
Uses 3/8-24 bolt to mount coax (Included)

$143.00
5 available
Fatboy Puck #3 (Quick Disconnect Antenna Mount)

Fatboy Puck #3 (Puck Style Quick Disconnect Antenna Mount)
Includes Fatboy Puck #3
Has Quick Disconnect for Easier Antenna Removal
Uses 3/8 - 24 Bolt to Mount Coax

$116.00
Fatboy Puck#2 (Quick Disconnect and Puck Mount Assembly)

MO-211A: 1 3/4" Hole for Mounting
MO-211B: 1 1/4" Hole for Mounting

Mobile Antenna Mount
Includes Fatboy Puck #2
Will Interchange with the Brass Swivel Ball
Has Quick Disconnect for Easier Antenna Removal
Uses 3/8 - 24 Bolt to Mount Coax

$101.99
Fatboy Puck#2 (Brass Swivel Quick Disconnect Mount)

Fatboy Puck#2 (Brass Swivel Quick Disconnect Mount)


Mobile Antenna Mount
MO-212A: 1 3/4" Hole for Mounting
MO-212B: 1 1/4" Hole for Mounting
Includes the Fatboy #2 Puck
For use with correcting your non-level angles
Uses 3/8-24 bolt to mount coax (Included)

$128.75
Out of Stock
Fatboy Puck Antenna Mount

MO-213A : 1/ 3/4" Hole for Mounting
MO-213B : 1 1/4" Hole for Mounting

Mobile antenna mount
1/4-20 Coax mounting hole Screw not included

$66.99
Fatboy Puck #5 Antenna Mount

MO-219- Fatboy Puck

MO-219A- Puck with Quick Disconnect

MO-219B- Puck with Brass Swivel w/ Quick Disconnect

Uses Mounting plate MO-218

from $100.00
Out of Stock
Audio Binding Posts

High Quality Binding posts

Accepts standard banana plugs (4mm), wires and terminals

1 pk of 2 red and 2 black

8mm (.32”) mounting hole

Picture is for reference purposes only

Actual Product May Vary

$3.75
8 available
Antenna Reinforcement Plate

Designed and manufactured for MO-219

Size of plate: 8x8

$35.50
Puck Screws 3pck

1/4-20-3/4

QTY 3 per bag

$3.00
Static Cap w/ Set Screw

Small- 3/4”: Height MO-344

Medium-7/8”: Height MO-345

Large- 1”: Height MO-347

from $10.25
Keep Nut 6-32 (Pack 100)

Thread 6-32
18-18 Stainless Steel

Picture is for reference purposes only

$7.75
Phil Pan Head Screw 6-32 (Pack of 100)

Size: 1/2"
18-18 Stainless Steel

Picture is for reference purposes only

from $6.75
Phil Pan Screws 10-32x5/8 100 pck

Bag of 100

$16.00
Cabinet Screws 6-32 1/4"Pack 100

Thread 6-32
Size 1/4"

18-18 Stainless Steel

Picture is for reference purposes

$6.99
4-40 Pill Screws

Bag of 100

Available in

1/4”

3/8”

$9.95
Black Oxide Stainless Steel Phillips Pan Head Machine Screws (50/pk)

Used mostly for metal applications

Complies with military standards as a Class 4 finish

ASME Standards Specific

Black oxide coating provides a sleek black look

Commonly used for:Drawer Slides,Machinery, and Automotive

Picture is for reference purposes only

$7.25
R4 Antenna

Made from 1” aluminum

6’ Heavy Duty whip

Top shaft - 8”

Bottom shaft - 12”

3 wrap coil 5.5” diameter

IF MULTIPLE ANTENNAS ARE ORDERED, PARTIAL SHIPPING MAY BE REFUNDED FOR OVER PAYMENT.

$130.00
Phil Pan Head Screw 6-32 (Fan Screws) (Pack of 50)

Sizes: 1 1/4”, 1 1/2”, 1 3/4” , and 2”
18-18 Stainless Steel
Recommended For Use With Our Fans (Except 38mm)

Picture is for reference purposes only

from $6.00
Nylon Nut 6-32 (Pack 100)

Thread 6-32
18-18 Stainless Steel

Pictuyre is for reference purposes only

$7.75
Shipping Corner Protectors

Perfect for extra protection on your packages

$0.20
Jam Nut 6-32 (Pack of 100)

Thread 6-32
18-18 Stainless Steel

Picture is for reference purposes only

$7.00
Ground Lugs (Pack 50)

Holds Up to #8

Picture is for reference purposes only

$8.75
Clear Tape Roll

Durable & Reliable

Color: Clear

Size: 3" x 110 yds.

Core size: 3”

Won't yellow. Makes packages look their best.

$6.39
Black Self Adhesive Rubber Feet (Pack of 12)

Color: Black (Pack of 12)
Easy Peel Kiss-Cut Pads.
Dimensions: 0.40"W x 0.10"H (10.2mm x 2.5mm)

$1.20
Standard Toggle Switch (on-off)
$1.00
W-32 SPDT Mini Toggle Switch

UL Listed, Mini toggle switch (On-On/ On-Off)

Mounts in a 1/4” hole with Solder tabs.
Rated 5 Amps @ 125VAC

$0.99
W-33 SPDT Mini Toggle Switch On-Off-On

Mini toggle switch
Mounts in a 1/4” hole with Solder tabs.
Rated 5 Amps @ 125VAC

$0.99
Full Size SPDT Toggle Switch On-On/ On-Off

Full Size Toggle Switch

On-On

Fits 1/2" Hole for Mounting

Rated: 10amp @ 250 VAC

15amp @ 125 VAC

Picture is for reference purposes only

$4.25
Single Meter Assembly Kit

Please note: All photos shown are for illustration purpose only

The kit does not come assembled as shown.

Includes :

Single Meter Case
One Meter Look alike only
Single Line Section
One Directional Coupler

Picture is for reference purposes only

Acutal Product May Vary

$226.00
Single Meter Case

Meter not included

Dimensions: Approx 5" x 4" x 4"

from $20.00
Single Line Section

Used

from $149.00
3 available
Single Line Section 1 5/8"

Used

$303.00
Out of Stock
Dual Meter Assembly Kit

Please note: All photos shown are for illustration purpose only

the kit does not come assembled as shown.

Includes :

Dual Meter Case
Two Meters Look alike only 
Dual Line Section
Two Directional Couplers

Picture is for reference purposes only

Actual Product May Vary

$426.00
8 available
Dual Meter Case

Dual Meter Enclosure (Meter not included)


Dimensions: Approx 8" x 4" x 4"

from $25.75
Dual Line Section 7/8"
from $230.00
Dual Line Section 3-1/8"
$509.00
Out of Stock
VQ3

Maco introduces the new VQ3 V-Quad Antenna that has been designed and tested by MaCo Engineering Department over the last 18 Months. The VQ3 is a 3 element full wave antenna that is great for DXing. It is directional and can be used on horizontal and vertical polarization with one feed line. The VQ3 is tune-able for 10 or 11 meters.  As always the MaCo gamma match is fully adjustable to obtain the lowest SWR.

$334.00
2 available
V QUADE

Using a Quad reflector with a Yagi driven
element, the Y-Quad combines the advantages
of both designs to give the best performing
lightweight antenna available, with
switchable polarity. The Quad reflector
assures low angle of radiation even at low
heights for real long distance performance.

Stack using YQSK

Additional shipping fee may apply

$223.00
1 available
SHOOTING STAR 8 ELEMENT BEAM

When performance at a price is your main consideration, look at the 8-element Shooting Star. Developed to fill the need for top performance, dual polarity operation, the Shooting Star has a gain of 14dB. That's like transmitting with 28 times your normal power! The design uses a 16-foot boom with six scientifically-spaced elements and a quad reflector to obtain the best combination of gain and front-to-back ratio. It's the same design used to bounce signals off the moon! And, it has the Maco 2kw power handling capability!

Power handling is 2000W PEP

Additional shipping fee may apply

$505.00
2 available
M103-HV MACO BASE ANTENNA 3 ELEMENT Dual Maximum Beam

Our Dual Maximum Beam M103HV is like
having two beams on one boom. You can
even tune one part for 10 meters and the other
for 11 meters. Just like the Maximum Beams,
the Dual Maximum Beams are ruggedly built
with swaged, slotted tubing for maximum
strength with minimum wind loading.

Additional shipping fee may apply

$364.00
2 available
M105C-HV MACO BASE 5 ELEMENT DUAL MAXIBEAMS

Our Dual Maximum Beam M105HV is like
having two beams on one boom. You can
even tune one part for 10 meters and the other
for 11 meters. Just like the Maximum Beams,
the Dual Maximum Beams are ruggedly built
with swaged, slotted tubing for maximum
strength with minimum wind loading

$765.00
Out of Stock
M106C-HV MACO BASE ELEMENT DUAL MAXIBEAMS

Our Dual Maximum Beam M106HV is like
having two beams on one boom. You can
even tune one part for 10 meters and the other
for 11 meters. Just like the Maximum Beams,
the Dual Maximum Beams are ruggedly built
with swaged, slotted tubing for maximum
strength with minimum wind loading.

Additional shipping fee may apply

$919.00
2 available
M108C-HV MACO BASE ANTENNA 8 ELEMENT Dual Maximum Beam

Truck  Shipping! WE MUST BE ABLE TO CONTACT YOU TO ARRANGE A TRUCK DELIVERY

Our Dual Maximum Beam M108HV is like
having two beams on one boom. You can
even tune one part for 10 meters and the other
for 11 meters. Just like the Maximum Beams,
the Dual Maximum Beams are ruggedly built
with swaged, slotted tubing for maximum
strength with minimum wind loading.

Additional shipping fee may apply

$1,215.00
2 available
M104 4 ELEMENT MAXIMUM BEAM

In the classic directional Yagi design, the 16'
long, 4 element M104 base station antenna
can be mounted either vertically or
horizontally for best base-to-mobile or
base-to-base communications. The M104
features a Maco 2kW adjustable gamma
match for high performance. Ruggedly built,
using swaged & slotted tubing for maximum
strength with minimum wind loading.

Additional shipping fee may apply

$335.00
2 available
M105 5 ELEMENT MAXIMUM BEAM

In the classic directional Yagi design, the 26'
long, 5 element M105 base station antenna
can be mounted either vertically or
horizontally for best base-to-mobile or
base-to-base communications. The M105
features a Maco 2kW adjustable gamma
match for high performance. Ruggedly built,
using swaged & slotted tubing for maximum
strength with minimum wind loading.

Additional shipping fee may apply

$458.00
1 available
M106 6 ELEMENT MAXIMUM BEAM

In the classic directional Yagi design, the 31'
long, 6 element M106 base station antenna
can be mounted either vertically or
horizontally for best base-to-mobile or
base-to-base communications. The M106
features a Maco 2kW adjustable gamma
match for high performance. Ruggedly built,
using swaged & slotted tubing for maximum
strength with minimum wind loading.

Additional shipping fee may apply

$571.00
2 available
M107 7 ELEMENT MAXIMUM BEAM

In the classic directional Yagi design, the
37.5' long, 7 element M107 base station
antenna can be mounted either vertically or
horizontally for best base-to-mobile or
base-to-base communications. The M107
features a Maco 2kW adjustable gamma
match for high performance. Ruggedly built,
using swaged & slotted tubing for maximum
strength with minimum wind loading.

Additional shipping fee may apply

$710.00
2 available
LASER 500 16 Element Base Station Antenna

Truck  Shipping! WE MUST BE ABLE TO CONTACT YOU TO ARRANGE A TRUCK DELIVERY

The Maco Super Laser 500 is a directional
dual polarity, Yagi-Quad base station antenna
with DPE, the most powerful and directive
beam antenna on the market. It has a gain of
18dB, develops an effective multiplied
power level 60 times that of your normal
transmitter, and comes with the Maco 2 kW
power handling capability. The Super Laser
500 is mounted on a 40' boom and uses 14
Yagi-type elements PLUS a Quad reflector.

Additional shipping fee may apply

$1,235.00
2 available
Flat 6 6 Element Laser W/ SCREEN REFLECTOR & 5K GAMMA MATCH

The Maco Flat 6 features six scientifically
spaced elements on a 31' boom. It comes with
a multiscreen reflector, plus a 5 kW gamma
match

Additional shipping fee may apply

$676.00
2 available
Flat 8 8 Element Laser W/ SCREEN REFLECTOR & 5K GAMMA MATCH

Truck  Shipping! WE MUST BE ABLE TO CONTACT YOU TO ARRANGE A TRUCK DELIVERY

The Flat 8 sits on a 40' boom and features 8
elements including a multiscreen reflector. It
comes with a Maco 5 kW gamma match and
has a front-to-back separation of up to 46
dB!  

Additional shipping fee may apply

$1,127.00
2 available
Y QUAD 2 ELEMENT BEAM

Using a Quad reflector with a Yagi driven
element, the Y-Quad combines the advantages
of both designs to give the best performing
lightweight antenna available, with
switchable polarity. The Quad reflector
assures low angle of radiation even at low
heights for real long distance performance.

Additional shipping fee may apply

$276.00
2 available
STACKS 3s 2 M103 MAXIMUM BEAMS & VQSK STACKING KIT

THE STACK 3'S CONSIST OF TWO OF THE M-103C MAXIMUM BEAMS ANTENNAS

3 ELEMENT "MAXIMUM" BEAM 11 METER ANTENNA
• Boom Length (ft)11.5
• Boom OD (inches)1.5 Number of Elements 3
• Longest Elements (ft)19
• Turn Radius (ft)10
• Surface Radius (sq. ft.) 4.5
• Wind Survival (mph) 90
• Tuning (Meters) 10-11
• Gain (db)11
• Power Multiplication 20X
• Frnt-to-Back Sep.(db) 25
• VSWR (adjustable) 1.5<
• Weight (lbs)14.
• Made With Aircraft Alloy Aluminum.

AND A VQSK STACKING KIT (ADDS 3DB GAIN)

THE STACKING KIT INCLUDES A 13.3' STACKING BOOM AND A WIRING HARNESS.

Additional shipping fee may apply

$628.00
2 available
VQSK V-QUAD & M103 STACKING KIT

The VQSK is used to stack the V-Quad and M103
beams. The cross boom length is 10' and the kit
weighs 8 pounds, including the harness.
Gain 3 dB over a single antenna.

M103C STACKING A pair of M 103C’s may be stacked by using the VQ2 Stacking Kit. Simply follow the assembly instructions given for the VQ2 Stacking Kit and disregard the first two paragraphs of the step labeled “Fig. 3”. Continue with the paragrs gamma match as shown in the drawing. VQ2SK h “Connect the two PL-259’s -----

Additional shipping fee may apply

$190.00
2 available
YQSK Y-QUAD STACKING KIT

The YQSK is used to stack Y-Quad beams.
The cross boom length is 19' and the kit weighs
25 pounds, including the harness.
Gain 3 dB over a single antenna.

Additional shipping fee may apply

$374.00
2 available
Shorty

Length: 17"

Top Shaft: 6.5"

Bottom Shaft: 6.5"
Coil: 1/2" Thick, 4 Wraps, 4" Diameter
Delrin: 4"
1" Tubing 6061 Aluminum with 6' Whip Stinger Included

$81.25
Out of Stock
Small Trucker

Length: 19"
Top Shaft: 6"
Bottom Shaft: 6"
Coil: 10 Wraps, 2.25" Diameter
Delrin: 1" x 7"
1" Tubing 6061 Aluminum
4' Whip Included

$58.99
Ripster Antenna

Made from 5/8 solid aluminum

Top/Bottom Shaft

Most are tuned lower than 1.3 SWR

**MOST POPULAR AND OUR BIGGEST SELLER**

AN-250B (5kV): 66" with Light Duty Stinger
AN-251B (10kV): 62" with Medium Duty Stinger
AN-252B (15kV): 48" with Heavy Duty Stinger

Comes with rubber protector that protects the set screw and stinger from water leakage and corrosion


*IF MULTIPLE ANTENNAS ARE ORDERED, PARTIAL SHIPPING MAY BE REFUNDED FOR OVER PAYMENT.

$65.99
7 available
R6 Antenna

Length: 24"
Top Shaft: 8"
Bottom Shaft: 12"
Coil: 3/4" Thick, 3 Wraps, 5.5" Diameter
Delrin: 1" x 3.5"
1" Tubing 6061 Aluminum

Heavy Duty 6' Whip Included

$130.00
Out of Stock
R6 Extended Antenna

Length: 36"
Top Shaft: 8"
Bottom Shaft: 24" (Instead of the standard AN-106's 12")
Coil: 3/4" Thick, 3 Wraps, 5.5" Diameter
Delrin: 1" x 3.5"
1" Tubing 6061 Aluminum• 6' Heavy Duty Whip Included

$130.00
Out of Stock
Large Trucker

Length: 26"
Top Shaft: 6"
Bottom Shaft: 12"
Coil: 12 Wraps, 2.25" Diameter
Delrin: 1" x 8"
1" Tubing 6061 Aluminum
4' Whip Included

$58.75
T-Antenna TOP ONLY

Two 2' Whips with Replaceable T-Top w/ stingers

$41.99
Remote Wire

Shielded

Sold by the foot.

Picture is for reference purposes only

Actual Product May Vary

from $0.56
RG 58U Coax Cable

Coax sold by the foot

Picture is for reference purposes only

$0.35
RG 303 Coax

Sold by the foot

Flex Type: Flexible

Impedance: 50 Ohm

Dielectric Type: PTFE

Jacket Diameter: 0.17 in

Jacket Material: FEP

No. of Shields: 1

Attenuation at 1 Ghz: 14db

Power, Max at 1 Ghz: 650 Watts

Frequency, Max: 3 GHz

Center Conductor Type: Solid

Inner Conductor. Number of Strands: 1

Picture is for reference purposes only

$2.62
RG 316 coax (Single Shield)

50 Ohms

Teflon Insulated Thermax

200C 501F rated

Picture is for reference purposes only

$0.88
RG 393 Jumpers

3' 6' 12 '   Jumpers Soldered 

Silver Conductor

2 Silver Shields

200c

50 ohm

from $36.70
Out of Stock
RG 218 Coax

Coax sold by the foot

Picture is for reference purposes only

$11.75
C-DC-2x8 Base

Screws Not Included - Screws can be purchased from our "Hardware" section.*

Clear Coated

Utilizes Two 120mm fans

Nylon Grommet: 2653(Fits Original drilled hole)

Cabinet Dimensions:24 5/8 x 14 5/8 x 5 3/8

Fits:

Circuit Board:

P-CB- 2x6 (11 1/4 x 7 5/8)

P-CB-2x8(11 1/4 x9)

P-CB-10 (12 1/4” x 9 1/8”)

Heatsink:

P-HS-8(9 1/2" x 6 1/5" x 1 5/16")

(9 1/4" x 4 1/4" x 1 3/8")

P-HS-M (9.25" x 5.886" x 1.270")

$105.99
RG 218 Pre-cut Lengths w/ End

Available in:

12 ft Jumper

18 ft Jumper

Comes with a UG-154 installed on one end

Picture is for reference purposes only

from $235.57
3 available
RG 174 Coax Cable

Coax by the foot.

Type 50 ohm Coax

26 awg (7/34) CCS

.020 (.51mm) PE INS.

Picture is for reference purposes only

$1.54
RG 142 Coax Cable

Coax sold by the foot.

Picture is for reference purposes only

$1.84
4 available
RG-8X Jumper

Type: RG-8/U 

Available in 3ft ,6ft ,9 ft ,12ft ,18 ft jumpers
Center Conductor Size: 16 AWG (19/29 Stranded) 
Shield Coverage: 100% Bonded foil 95% Bare copper braid 
Inner Insulation Nominal OD: 0.157" 
Inner Insulation Materials: Polyethylene 
Outer Jacket Nominal OD: 0.240" 
Outer Jacket Materials:  PVC 
Nominal Capacitance: 26.0 pF/ft 
Velocity of Propagation: 78% 
Nominal Impedance: 50 ohm

from $9.27
6 available
RG 8X Coax Cable

Sold by the foot

Type: RG-8/U 

Center Conductor Size: 16 AWG (19/29 Stranded) 

Shield Coverage: 100% Bonded foil 95% Bare copper braid 

Inner Insulation Nominal OD: 0.157" 

Inner Insulation Materials: Polyethylene 

Outer Jacket Nominal OD: 0.240" 

Outer Jacket Materials:  PVC 

Nominal Capacitance: 26.0 pF/ft 

Velocity of Propagation: 78% 

Nominal Impedance: 50 ohm

Photos are for reference purposes only

$1.19
Multi-Conductor Cable- Black

Price per Foot

Use for High Amp/ Heavy Duty Alternators

Picture is for reference purposes only

$10.95
CAP-A-33

Value: 33UF

Voltage: 35V

$0.20
Stainless Steel U Bolts(10 pack)

Hex Nuts inculded

Commonly used for Antennas & Gamma Matches

Stainless Stain 304

1/4-20

$40.00
Stryker Nitro Star-Bryte Lighted Radio Knob SR1


Color Options:Purple, Blue, Green, Red , Amber 

Model # SR-1 / Channel Selector

Channel/Frequency Control Knobs

LED inside Knob glows
Extra Long Knob - Easier to reach
For "D" Shaft Control

Please call the shop if you need help to order 609-965-9494

Pictures are for reference purposes only

$14.99
Stryker Nitro Star-Bryte Lighted Radio Knob SR2

Color Options: Red, Green, Blue, Purple,Amber

Model # SR-2 Volume/Squelch

Control Knob

LED Inside-knob Glows

Extra Long Knob

For "D" Shaft Controls

Single Knob

Please call the shop if you need help to order 1-609-965-9494

Picture is for reference purposes only

$14.99
Stryker Nitro Star-Bryte Lighted Radio Knob SR3


Color Options: Purple, Blue, Amber, Green, and Red 

Model # SR-3

Band/Rotary Control Knob

LED Inside knob glows

Extra Long Knob

For Knurled (18 Teeth) Shaft Controls Single Knob

Pictures are for reference purposes only

Please call the shop if you need help to order 1-609-965-9494

$14.99
Pro Trucker Astatic Chrome 5" Quad-Mag Mount

3/8 - 24 mount.
Includes 17′ of RG58 coax with weather proof soldered on PL259 connector.
Deluxe 5″ extra strong 12 pole magnets.
This is the strongest magnetic mount available.     
Very Low profile, magnets are only 1/2 inch high

$82.95
3 available
Radio Covers

Diamond Plated

Model 148F: 8.5" x 8" x 1.25"
Model 148S: 8.5" x 8" x 1.25"
Model 29F: 8" x 7.5" x 1.25"
Model 29S: 8" x 7.5" x 1.25"
Model 25F: 8" x 6.5" x 1.125"
Model 25S: 8" x 6.5" x 1.125"

Model 29C (Custom 29):

$21.75
Radio Cover Bracket

Diamond Plated

Bracket for 148
Bracket for 29
Bracket for 25

Picture is for reference purposes only

from $4.99
Extra Small Proto type Board

Dimensions: 3”x2”

Picture is for reference purposes only

$1.99
Protoboard Large

Protoboard with 0.1" x 0.1" Grid of Non-Plated 0.062" Holes

Board Size: 4.5" x 8.5"

Picture is for reference purposes only

$15.00
Out of Stock
5.375" Wide Extruded Aluminum Heatsink

SOLD BY THE INCH.

X" x 5.375" x 1.325"

X" =is the Quantity of inches you wish to purchase.

Please enter Quantity of inches to purchase.

Picture is for reference purposes only

from $2.50
P-HS-M

Dimensions: 9 1/2" x 5.375 x 1 3/8"
Fits:
Cabinets:
C-DC-8 (12" x 7 3/4" x 5 1/4") - Requires 1 piece of Heatsink
C-DC-16 (14 1/4" x 13 1/2" x 5 1/4") - Requires 2 pieces of Heatsink
C-DC-24 (14 1/4" x 20 5/8" x 6 1/4") - Requires 3 pieces of Heatsink

Circuit Boards:
P-CB-2x4L (11 1/4" x 7 5/8")
P-CB-6 (11 1/4" x 7 5/8")
P-CB-16 (14 1/4" x 13 1/2" x 5 1/4")
P-CB-24 Base (20 5/16" x 13 1/4")

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Picture is for reference purposes only

$26.51
P-HS-L

Dimensions: 17 1/2" x 5 3/8" x 1 3/8"

Fits:
Cabinets:
C-DC-32 (24 1/2" x 13 1/2" x 6")- Requires 1 piece of Heatsink with P-CB-16ST-S
C-DC-32 (24 1/2" x 13 1/2" x 6")- Requires 2 pieces of Heatsink with P-CB-32
C-DC-32Comp (27 1/4" x 15 1/4" x 6 1/4")- Requires 2 pieces of Heatsink with P-CB-32Comp
C-DC-48 (27" x 19 1/4" x 5 1/4")- Requires 4 pieces of Heatsink with P-CB-48
C-DC-64 (27" x 23 1/4" x 5 1/4")- Requires 4 pieces of Heatsink with P-CB-64

Circuit Boards:
P-CB-16ST-S (23 1/4" x 13 3/8")
P-CB-32 (23 1/4" x 13 3/8")
P-CB-32Comp (24 3/4" x 15 1/4")
P-CB-48 (26 3/4" x 17 1/4")
P-CB-64 (26 3/4" x 21 1/4")

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Picture is for reference purpose only

$48.83
P-HS-2

Dimensions: 2 1/2" x 4 1/4" x 1 3/8"
Fits:
DC Cabinet: C-DC-2 (6 1/2" x 3 3/4" x 3 1/8")
Circuit Board: P-CB-2 (5" x 3 3/8")

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Picture is for reference purposes only

$6.98
P-HS-3

Dimensions: 3 1/4" x 5 3/8" x 1 3/8" 
Fits:
Cabinets:

C-DC-3 (7 1/2" x 5" x 4")

C-DC-4 Mobile (6 3/8" x 5 1/4" x 4")

Circuit Boards:

P-CB-2 pill Extended( (6 13/16" x 4")
P-CB-1x2 (6 13/16" x 4")
P-CB-4 Mobile (6 3/16" x 4 1/2")

Picture is for reference purposes only

$9.77
P-HS-4

Dimensions: 4 3/8" x 5 3/8" x 1 3/8"
Fits:
Cabinet: C-AC-BS3 (13 1/2" x 7 3/4" x 5 1/2")
Circuit Board: P-CB-4 Base (7 5/8" x 5 1/8")

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Picture is for reference purposes only

$17.79
P-HS-5

Dimensions: 8 1/4" x 5 3/8" x 1 3/8"
Fits:
DC Cabinet: C-DC-5 (11" x 6 3/8" x 4")
Circuit Board: P-CB-2x4 (10 1/4" x 6 1/2") & P-CB-6ST (10 1/4" x 6 3/16")

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Picture is for reference purposes only


$23.02
P-HS-8

Dimensions: 9 1/2" x 5.886 x 1 5/16"
Fits:
Cabinet: C-DC-8 (12" x 7 3/4" x 5 1/4")
Circuit Board: P-CB-2x6 (11 1/4" x 7 5/8")

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Picture is for reference purposes only

$20.00
P-CB-2

Dimensions: 5" x 3 3/8"
Fits:
Cabinet: C-DC-2 (6 1/2" x 3 3/4" x 3 1/8")
Heatsink: P-HS-2 (2 1/2" x 4 1/4" x 1 3/8")

from $8.00
P-CB-2 Extended

Dimensions: (6 13/16" x 4")

Fits:

Heatsink:P-HS-3 (1 Piece) (3 1/4" x 5 3/8" x 1 3/8")

Cabinet:C-DC-3 mobile(7 1/2" x 5" x 4")

from $11.00
P-CB-1x2

Dimensions: 6 13/16" x 4"
Fits:
Cabinet: C-DC-3 (7 1/2" x 5" x 4")
Heatsink: P-HS-3 (3 1/2" x 5 3/8" x 1 3/8")

from $11.00
P-CB-4 Mobile

Dimensions: 6 3/16" x 4 1/2"
Fits:
Cabinet: C-DC-4 Mobile (6 3/8" x 5 1/4" x 4")
Heatsink: P-HS-3 (3 1/2" x 5 3/8" x 1 3/8")

from $11.00
P-CB-4.5

Dimensions: 6 1/2” x 6 7/16”

Fits:

Cabinet: C-DC-4.5(7 1/4" x 6 1/2" x 4 1/8")

Heatsink:P-HS-3( 5 3/8” x 3 1/2”)

from $13.90
P-CB-4 Base

Dimensions: 7 5/8" x 5 1/8"
Fits:

Cabinet: C-DC- 4 pill base (12" x 7 3/4" x 5 1/4")
Heatsink: P-HS-4 (6 3/8" x 5 3/8" x 1 3/8")

from $13.90
P-CB-2x4

Dimensions: 10 1/4" x 6 1/4"
Fits:
Cabinet: C-DC-5 (11" x 6 3/8" x 4")
Heatsink: P-HS-5 (8 1/2" x 5 3/8" x 1 3/8")

from $15.00
P-CB-2x4L

Dimensions: 11 1/4" x 7 5/8"
Fits:
Cabinet:C-DC-6 (12" x 7 3/4" x 5 1/4")
Heatsink: P-HS-M (9 1/4" x 5 3/8" x 1 3/8")

from $23.00
P-CB-6ST

Dimensions: 10 1/4" x 6 1/4"
Fits:
Cabinet: C-DC-5 (11" x 6 3/8" x 4")
Heatsink: P-HS-5 (8 1/2" x 5 3/8" x 1 3/8")

from $13.00
P-CB-2x6

Dimensions: 11 1/4" x 7 5/8"
Fits:
Cabinet: C-DC-8 (12" x 7 3/4" x 5 1/4")
Heatsink: P-HS-8 (9 1/2" x 6 1/5" x 1 5/16")

from $23.00
P-CB-8 Small

Dimensions: 11 1/4" x 7 5/8"

Fits:

Cabinet: C-DC-8 (12" x 7 3/4" x 5 1/4")

Heatsink: P-HS-M (9 1/4" x 5 3/8" x 1 3/8")

from $23.25
P-CB-8 Medium

Dimensions: 11.375 x 9.125

Fits:

Cabinet: C-DC- 2x8 (12 7/8" x 9 1/4" x 5 1/4")

Heatsink: P-HS-M(9 1/4" x 5 3/8" x 1 3/8")

from $23.50
P-CB-8 Large

Dimensions: 13 1/4" x 13 3/8"

Fits:

Cabinet: C-DC-16(14 1/4" x 13 1/2" x 5 1/4")

Heatsink: P-HS-M(9 1/4" x 5 3/8" x 1 3/8")

from $26.25
P-CB-2X8 mobile

Dimensions: 11 1/4" x 9"
Fits:
Cabinet: C-DC-2x8 (12 7/8" x 9 1/4" x 5 1/4")
Heatsink: (2 Piece) (9.25" x 4.25" x 1 3/8")

from $29.25
P-CB-10

Dimension:12 3/8 x 9 1/8

Fits:

Cabinet: C-DC-2x8 (12 7/8" x9 1/4" x 5 1/4")

Heatsink: P-HS-M (9.25" x 5.886" x 1.270")

from $29.25
P-CB-12ST

Dimensions: 19 1/4" x 13 5/16"
Fits:

Cabinet: C-DC-24 Mobile (20 1/2" x 13 1/2" x 5 1/4")

Heatsink: P-HS-L (1 Pieces)- 17 1/2" x 5 3/8" x 1 3/8"

from $56.00
P-CB-16

Dimensions: 13.312 x 13.312

Fits:

Cabinet: C-DC-16 (14 1/4" x 13 1/2" x 5 1/4")

Heatsink: P-HS-M (2) 9 1/4" x 5 3/8" x 1 3/8"

from $36.00
P-CB-16ST

Dimensions: 23 1/4" x 13 3/8"
Fits:
Cabinet: C-DC-32 (24 1/2" x 13 1/2" x 6")
Heatsink: P-HS-L (17 1/2" x 5 3/8" x 1 3/8")

from $58.50
P-CB-24 Mobile

Dimensions: 19 1/4" x 13 5/16"
Fits:
Cabinet: C-DC-24 Mobile (20 1/2" x 13 1/2" x 5 1/4")
Heatsink: P-HS-L(17 1/2" x 5 3/8" x 1 3/8")

from $55.00
P-CB-24 Base

Dimensions: 20 5/16" x 13 1/4"
Fits:
Cabinet: C-DC-24 Base (14 1/4" x 20 5/8" x 6 1/4")
Heatsink: P-HS-M (3 Pieces) (9 1/4" x 5 3/8" x 1 3/8")

from $59.00
P-CB-32

Dimensions: 23 1/4" x 13 3/8"
Fits:
Cabinet: C-DC-32 (24 1/2" x 13 1/2" x 6")
Heatsink: P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8")

*REPLACED BY P-CB-32 COMP*

from $58.50
P-CB-32 Comp

Dimensions: 24 3/4" x 15 1/4"
Fits:
Cabinet: C-DC-32 Comp (27 1/4" x 15 1/4" x 6 1/4")
Heatsink: P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8")

*REPLACED THE P-CB-32*

from $66.40
P-CB-48 Jumbo

Dimensions: 26 3/4" x 22 3/16"
4 Rows of 12 Holes Pictured. 3 Rows of 16 Holes available.

Fits:
Cabinet: C-DC-48 Jumbo (23 1/4" x 26 13/16" x 6 1/4")
Heatsink: P-HS-L (4 Pieces) (17 1/2" x 5 3/8" x 1 3/8")

from $95.62
P-CB-64

Dimensions: 26 3/4" x 22 1/4"
Fits:
Cabinet:
C-DC-48 Jumbo (23 1/4" x 26 13/16" x 6 1/4")
C-DC-64 Jumbo (26 1/4" x 26 13/16" x 5 1/4")
Heatsink: P-HS-L (4 Pieces) (17 1/2" x 5 3/8" x 1 3/8")

from $108.00
P-CB-64 Jumbo

Dimensions: 26 3/4" x 25 3/16"
4 Rows of 16 Holes

Fits:
Cabinet: C-DC-64 Jumbo (26 1/4" x 26 13/16" x 5 1/4")
Heatsink: P-HS-L (4 Pieces) (17 1/2" x 5 3/8" x 1 3/8")

from $108.00
Mosfet Board

7 3/4" x 8 3/4"

Mosfet Board

from $19.50
Board & Sink- 4.5

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled

Fits: C-DC-4.5(7 1/4" x 6 1/2" x 4 1/8")

INCULDES:

Circuit Board: 6 1/8 x 6 ½

Heatsink: 5 1/2 x 3 5/8

Heavy Duty Heatsink: 5 3/8 x 4 3/4 ( Best to use with 2879’s)

from $31.99
Output Choke

43 Ferrite 1/2 x 1/2

16G Silver Plated Teflon Wire

23-26uH

Picture is for reference purposes only

$0.95
N Male to UHF Female Adapter

Connector Antenna

Coaxial Adapter

Connector RF

Picture is for reference purposes only

Actual Product May Vary

$8.00
SO-239 Screw On

Bakelite

$1.50
8 available
Square Meter

100UA Meter
Fits 1 5/8 & 3 1/8 Meters

$153.00
Round Panel Volt Meter

65C5 Analogue Panel Meter Volt Voltage Gauge Analog Voltmeter DC 0-30 V

Picture is for reference purposes only

Actual Product May Vary

$20.50
Square Panel Mount Volt Meter

0-15V

0-30V

Picture is for reference purposes only

Actual Product May Vary

$20.50
Look A Like Meter

This is a Look "A like" Meter. It is not a Genuine Bird Brand Meter.

Picture is for reference purposes only

Actual Product May Vary

$51.50
4 available
Digital 500 Amp Panel Meter W/ Shunt

--DC 0-500A ammeter with shunt can test positive and negative current.

--The power supply can be AC or DC 8-12V, and has reversed connection protection.

--Dimensions: 79 x 43 x 25 mm; Installation Hole: 76 x 39 mm.

--Technical Parameters:

--Operating voltage: AC / DC 8 - 12V

--Measurement range: DC 0-500A

--Operating current: <15mA

--Display: LCD, Blue backlight, Character height 20mm

--Dimensions: 79 x 43 x 25 mm

Picture is for reference purposes only

Actual Product May Vary

$49.95
1 available
Small Foot Pedal

W: 2.75" H:1.25" D: 4" WT: .6

*Does NOT come with a cord

Picture is for reference purposes only

Actual Product May Vary

$15.50
Used Watt Meter

Guaranteed to be in great working condition upon arrival

$329.99
Rocker

Product Type: Standard
Actuation () indicates momentary: ON-ON
Actuation Circuit: SPDT
Terminal Type: .250" Blade
Electrical Rating: 16A, 125V AC
Illumination: None
Type: Rectangle .37" x .77"
Actuator Material: Plastic
Mounting Type: Snap-In .550" x 1.125"

$1.69
Single Panel Mount Breaker

Amps 20, AC Voltage Rating 250/277V AC, DC Voltage Rating 80V DC

Amps 25, AC Voltage Rating 277V AC, DC Voltage Rating 80V DC 

Amps 40, AC Voltage Rating 250/277V AC, DC Voltage Rating 80V DC

New in box

from $22.99
Power Cord 6ft.

6 foot Standard  3 prong IEC plug.

from $8.95
50A Receptacle

125/250VAC

3 Pole

3 Wires

hardware included

$11.39
80A Solenoid

IB80

16 Ohms Coil Resistance
Continuous Duty
Normally Open
Continuous Contact Rating 100 Amps
Inrush 300 Amps

$19.98
Out of Stock
S80 Plug

30 A  125/250V with L blade 

50 A 125/250V with Flat Blade 

3 - pole , 3 wire 

Picture is for reference purposes only

$14.95
Rubber Transformer Mount

Heavy duty anti -vibration rubber mount

5/16 center hole

Picture is for reference purposes only

Actual Product May Vary

$1.25
3 available
Right Angle Male to Female Connector

Gold plated pins.

$8.95
Double Panel Mount Breaker

Amps 20:

AC Voltage Rating 277V AC,DC Voltage Rating 80V DC

Amps 30:

AC Voltage Rating 240/277V AC, DC Voltage Rating 125V DC

Dimensions: 1 1/2 x 2 x 1 5/8

$51.99
Out of Stock
QC Solderless Connector

1 5/8" Flange to QC (F)

$149.99
Out of Stock
Regulator Bypass Plate

For use on large 200-320 amp cases
Eliminates factory regulator
External regulator required (see regulators)

$17.99
SPST ON-OFF Red Illuminated Appliance Rocker

Fits standard .550" x 1.125" panel cutout 
Recommended uses: Home appliances, computer equipment, automotive and industrial controls 
Materials: terminals are brass, contacts are copper alloy or silver plated copper alloy, case and rocker are black nylon and lighted rocker is transparent polycarbonate 
Rated: 10A/250V AC; 16A/125V AC

$1.25
Microphone End Jack

from $3.00
Microphone End Connectors(Plug)

Replaces your broken ends

from $4.00
Male LC Connector

Male LC Connector
LC (Male)
Bright Nickel Plated
Easily Changed by Removing and Replacing Four Screws

Picture is for reference purposes only

Actual Product May Vary

$236.00
Rocker w/ Writing

Product Group: Rocker
Product Type: Standard
Actuation () indicates momentary: ON-OFF
Actuation Circuit: SPST
Terminal Type: .250" Blade
Electrical Rating: 16A, 125V AC
Illumination: None
Type: Rectangle .37" x .77"
Actuator Material: Plastic
Mounting Type: Snap-In .550" x 1.125"

$1.95
Maco M104 4 Element Base Station Antenna

In the classic directional Yagi design, the 16'
long, 4 element M104 base station antenna
can be mounted either vertically or
horizontally for best base-to-mobile or
base-to-base communications. The M104
features a Maco 2kW adjustable gamma
match for high performance. Ruggedly built,
using swaged & slotted tubing for maximum
strength with minimum wind loading.

  • This is an oversize antenna. There is an extra handling charge shipment

  • Prices subject to change due to metal prices

  • Elements

  • 16' Boom Length

  • 28x Power Multiplication

  • 14 dB Gain

  • 90mph Wind Survival

  • 13' Turn Radius

  • 6.33 sq. ft. Surface Radius

$355.00
Out of Stock
RF Chokes

Epoxy Coated

High Q Value and Self-Resonant Frequency

Color Band Identifier

Operating Temperature: -25°C to 85°C

Series: EC24

Power : 22uH-1/4 W 27uH-1/2W

Tolerance: ±10%

$0.12
Asteroid Maco Base Antenna

We are pleased to announce the release of the all new Asteroid
antenna. This is a high performing, dual polarity beam that is sure to
impress. Boasting 10 elements, 5 vertical and 5 horizontal, it is mounted on
a 26’ boom and features a multiscreen reflector. The Asteroid can be tuned for 10 or 11 meters.
It has 11.84 sq ft of wind load and weighs in at 45 pounds.
Gain: 15.5 dB
Front to Back Separation: up to 40 dB
Power Multiplication: 40X
Prices subject to change due to metal prices

Boom Length - 26'
Boom OD - 2"
Elements - 10
Longest Element - 17.5'
Turn Radius - 16'
Wind Load - 11.84 sq. ft
Wind Survival - 90 mph
Gain - 15.5dB
Front to Back Seperation - up to 40dB
Power Multiplication - 40x
Tuning - 10/11 Meters
Power Handling - 2kW stock (upgradeable to 5,10,30 kW)
Weight - 45 lbs.
Shipping Dimensions - 82" x 7" x 7"
Extra shipping charges may apply 

$786.00
2 available
Russian Tube Mounting Plate Adapter

YC-156     WITH   PRESS NUTS 

We will be offering a cheaper one that is hand tapped soon 

$49.00
LMR600 7/16 Connecter

7/16 DIN Male Crimp,

Cable Group L2, LMR600

Body: Silver

Center Pin: Silver

Dielectric: PTFE

$34.75
LMR400 7/16 Connecter

DIN male connector for 400 sized cables. Captivated center pin, non-corrosive materials and one piece design. Water Tight Seal.

Cable Types: LMR400, CNT400

Freq: DC-6 GHz

Ohms: 50

N, Male

$37.00
Line Section DC Connector

Screws onto the side of the line sections

Picture is for reference purposes only

Actual Product May Vary

$29.99
LC40 Welding Quick Disconnect Set

Male-Female

Recommended for 24-32 pill

Picture is for reference purposes only

Actual Product May Vary

$19.95
LC10 Welding Quick Disconnect Set

Male-Female

Picture is for reference purposes only

$17.95
LASER 400 12 Element Base Station Antenna

The 12 Element Laser is designed to achieve
the maximum gain and front-to-back ratio
using a Quad Reflector and Yagi parasitic
elements. There are 6 elements vertical and 6
elements horizontal spaced on a 31 foot boom
for optimal performance. The Laser 400
features switchable polarity and the Maco
2kW power handling capability. Second only
in performance to the larger Laser 500.

This is an oversize antenna. There is an extra handling charge on shipments.

Prices subject to change due to metal prices

Features:

  • 12 Elements

  • 31' Boom Length

  • 50x Power Multiplication

  • 17 dB Gain

  • 90mph Wind Survival

  • 17' Turn Radius

  • 10.5 sq. ft. Surface Radius

  • Vertical/Horizontal Beams

$919.00
2 available
Large Rubber Feet
$1.99
Input Choke

22 gauge silver plated Teflon wire

23 - 26 uH

Picture is for reference purposes only

$0.95
ICA Catalog

ICA Manufacturing Product Catalog (2018)

Download the catalog here!

Download Catalog here!

https://1drv.ms/w/c/0057a4da956e99d3/ESDuax9OJmBOpIGyuOMeKJkBoB5FuztR44Ig3owjXecgwg?e=ZizGkf

$0.00
Out of Stock
Heavy Duty Brass Bolt

Measures 1 3/4" Long

1/2" x 20 Thread
For Mounting Brass Bolt
Fits Through the Antenna Insulators
Has 1/4" - 20 Hole for Coax

$7.25
Hakko Heating Element

Simultaneous use of two 24V soldering irons, combined with separate and independent on/off and temperature controls, allows this station to handle a wide range of applications. Dual-output power unit is matched up with a macro iron (P/N C1148) for general purpose soldering, and a micro iron (P/N 900SESD) for SMT and precision soldering. Irons are interchangeable and feature dial-adjustable temperature range of 392°F-896°F, quick heat-up, and fast thermal recovery to provide high quality soldering at low tip temperature. Ceramic heating element built into each iron maintains tip temperature to within ±1.8°F of setting. Leak voltage between tip and ground is less than 0.6mV. Non-sluffing, static-dissipative housing eliminates any possibility of static discharge. Station meets Mil-Specs MIL-STD-2000, DOD-STD-2000-1B and WS-6536E; and ESD-Specs DOD-STD-1686 and DOD-HDBK-263. Operates on 120VAC and comes with 50-watt macro iron (includes 900MT16D tip), 50- watt micro iron (includes 900STI tip), dual iron holder with sponge, and 3-wire cord.


$18.50
Grab Handles (Pair - 2pcs)

A Pair of Grab Handles (2 Handles Included)
Length: 3 3/4" (Center to Center)
Screws Required: 8-32 will fit

Picture is for reference purposes only

Actual Product May Vary

$5.00
Out of Stock
Rocker Switch SPDT

Product Group: Rocker
Product Type: Standard
Actuation () indicates momentary: ON-OFF
Actuation Circuit: SPST
Terminal Type: .250" Blade
Electrical Rating: 16A, 125V AC
Illumination: None
Type: Rectangle .37" x .77"
Actuator Material: Plastic
Mounting Type: Snap-In .550" x 1.125"

$0.99
GMA Replacement Fuse- Small

Available in a variety of different amperages

$0.77
GMA Fuse Holder- Small

Fuse Holder for 3/16" x 3/4" fuses.
Screw cap.
Solder-lug terminals.
Rated 10 Amps 250 Vac.

$1.75
Flat Braid Cable for High Current 1/2"

PRICE IS PER FOOT

Width: 1/2" (estimated)

Used for bonding, straps, grounding or connecting moving parts

Picture is for reference purposes only

$2.75
Cobra 29 LX OEM COMP

Large Digital Display with four selectable colors in green, blue, amber, and red

Dynamic Microphone (4 pin)

Has night and day settings for readability

Variable RF Power On Delta Tune Control

1-17 watts Deadkey

60W PEP

Realign PLL,VCO and Receiver

Adjust Meter Readings

7 amp Fuse

$289.00
Ferrite Ring 61 (.750 x 1.15)

Inside 19 mm

Outside 29 mm

Outside 13.85 mm

.750 x 1.15

Picture is for reference purposes only

Actual Product May Vary

$6.74
Female LC Connector

Real Bird connector

for use on the Bird 43 wattmeter

Four Screw Holes to Mount

$82.00
375P 3PDT 12VDC Relay

coil S155D

$69.00
2 available
FB-B5 (Baby 5)

Length: 19"

Top Shaft: 8"

Bottom Shaft: 8"

Coil: 1/2" Thick, 3 Wraps, 5.5" Diameter
Delrin: 1" x 2.5"
1" Tubing 6061 Aluminum• 6' Heavy Duty Whip Included

$125.00
Out of Stock
FB Medium


Length: 28"
Top Shaft: 12"
Bottom Shaft: 12"
Coil: 1/2" Thick, 4 Wraps, 4" Diameter
Delrin: 1" x 4"
1" Tubing 6061 Aluminum
6' Whip Included

Extra shipping charges may occur.

$89.00
FB Long


Length: 29"
Top Shaft: 7"
Bottom Shaft: 17.5"
Coil: 1/2" Thick, 4 Wraps, 4" Diameter
Delrin: 1" x 4"
1" Tubing 6061 Aluminum• 6' Whip Included

Extra shipping chargers may occur.

$89.00
SO-239 Hardware Mount

For UHF and VHF Radios

$30.00
120mm Fan Filter Screen

Aluminum frame with 0.6 thickness

Stainless steel mesh 24# / 25.4mm

Available in Silver & Black

Picture is for reference purposes only

Actual Product May Vary

$4.99
Fan Blade Spacer
$3.00
External Rectifier

225 Amps @ 15 Volts

450 Amps @ 15 Volts

Heavy Duty Version has 6 large diodes
Converts AC Alternators to DC volts
Extra slots for extra ventilation
Non Corrosive
Non Conducting Finish

Picture is For Reference Purposes only

Actual Product May Vary

$283.00
Dual Regulator Cabinet

*Screws Not Included - Screws can be purchased from our "Hardware" section.

Coating : Clear Finish

Cabinet Dimensions:

Cabinet Thickness:

2 Meter Hole

$29.99
Dual Male Connector

  Used for two UHF Female connectors together

Picture is for reference purposes only

Actual Product May Vary

$7.99
Dual Female Gold Center Teflon Connector

UHF Double Female Barrel
Teflon Dielectric
Gold Center
16 Point

$5.99
Dual Female 4" Bulkhead Connector
$7.25
Dual Female 1" Barrel Connector

Picture is for reference purposes only

Actual Product May Vary

$1.50
W-35 DPDT Mini Toggle Switch On-Off-On

Mini toggle switch
Mounts in a 1/4” hole with Solder tabs.
Rated 5 Amps @ 125VAC

$1.00
Full Size DPDT Toggle Switch On-On / On-Off

Full Size Toggle Switch

6 Screw on Terminals

Fits 1/2" Holes for Mounting

Rated: 15amp @ 250 VAC

20amp @ 125 VAC

Picture is for reference purposes only

$3.95
Full Size DPDT Toggle Switch On-Off-On
$4.45
Triple Meter Case

Picture is for Reference Purposes only

Acutal Product May Vary

$29.99