- All
- Newly Added Items
- Shipping Material
- Labels & Stickers
- AC Power Cords
- Alternators
- Antennas
- Board & Sink - BS Packs
- Blowers
- Bridge Rectifier
- Cabinets
- Cable
- Capacitors
- Ceramic Doorknob Capacitors
- CB Radios
- CBS Packs
- Chimney AC Teflon - TFE
- Circuit Board
- Circuit Breakers
- Coax Cable
- Combiners
- Connectors
- Copper End Plate
- Copper Lugs
- Diodes
- External Rectifier
- Fans & Fan Grill Guards
- Ferrite
- Field Strength Meter
- Fuse & Fuse Holders
- Gamma Rods
- Grommets & Strain Relief
- Ground Strap
- Hardware
- Heatsink
- Heatsink/Thermal Compound
- Idler & Pulley
- Input-Output Chokes
- Insulators
- Knobs
- LEDs
- Meters & Shunts
- Miscellaneous Parts
- Modules
- Pill Strips & Power Strips
- Potentiometers
- Power Plugs
- Power Supplies
- Preamp
- Prototyping Boards
- Quick Disconnects
- Radio Covers
- Regulators
- Relays
- Remotes
- Resistors
- RF Chokes
- RF Transformer
- Rubber Feet
- Shrink Sleeve
- Soldering
- Solenoids
- Stryker Nitro Radio Knob
- Switches
- Terminals
- Thermal Insulator Pads-Mosfet
- Tools
- Transformers
- Transistors
- Watt Meter Equipment
- Wire
- Zip Cord
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in a C-DC-2(6 1/2" x 3 3/4" x 3 1/8")
INCLUDES:
Circuit Board:
P-CB-2 (5" x 3 3/8")
Heatsink:
P-HS-2 (1 Piece) (2 1/2" x 4 1/4" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in a C-DC-3 Mobile( 7 1/2" x 5" x 4")and C-DC-4 pill base((12×7 7/8 × 5 1/4))
INCULDES:
Circuit Board:
P-CB-2 pill extended (6 13/16" x 4")
Heatsink:
P-HS-3
(3 1/4" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*]
Fits in a C-DC-3(7 1/2" x 5" x 4") & C-DC-4 Base(12×7 7/8 × 5 1/4)
INCULDES:
Circuit Board:
P-CB-1x2 (6 13/16" x 4")
Heatsink:
P-HS-3 (1 Piece) (3 1/2" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled
Fits in a C-DC-4 Mobile( 6 3/8" x 5 1/4" x 3 3/8")
INCLUDES:
Circuit Board:
P-CB-4 Mobile (6 3/16" x 4 1/2")
Heatsink:
P-HS-3 (1 Piece) (3 1/2" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled
Fits: C-DC-4.5(7 1/4" x 6 1/2" x 4 1/8")
INCULDES:
Circuit Board: 6 1/8 x 6 ½
Heatsink: 5 1/2 x 3 5/8
Heavy Duty Heatsink: 5 3/8 x 4 3/4 ( Best to use with 2879’s)
*Screws Not Included - Screws can be purchased from our "Hardware" section.*
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in a C-DC-4 Base (12×7 7/8 × 5 1/4)
INCULDES
Circuit Board:
P-CB-4 base(7 5/8" x 5 1/8")
Heatsink:
P-HS-4 (6 3/8" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in a C-DC-5 mobile(11" x 6 3/8" x 4") & C-DC-5.5 base(14 1/4" x 13 1/2" x 5 1/4")
INCLUDES:
Circuit Board:
P-CB-2x4 (10 1/4" x 6 1/2")
Heatsink:
P-HS-5 (1 Piece) (8 1/4" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled
Fits in a C-DC-6(12" x 7 3/4" x 5 1/4")
INCLUDES:
Circuit Board:
P-CB-2x4L (11 1/4" x 7 5/8")
Heatsink:
P-HS-M (1 Piece) (9 1/4" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-5(11" x 6 3/8" x 4")
INCLUDES:
Circuit Board:
P-CB-6ST (10 1/4" x 6 3/16")
Heatsink:
P-HS-5 (1 Piece) (8 1/2" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-2x8(12 7/8" x 9 1/4" x 5 1/4") & C-DC-2x6 Base(24 5/8 x 14 5/8 x 5 3/8)
INCULDES:
Circuit Board:
P-CB- 2x6 (11 1/4 x 7 5/8)
Heatsink:
P-HS-8(9 1/2" x 6 1/5" x 1 5/16")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-2x8 & up
INCULDES:
Circuit Board:
P-CB-8 Small (11 1/4” x 7 5/8)
Heatsink:
P-HS-8 (9 1/2" x 5.886")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits C-DC-2x8 (Mobile & Base) & up
INCULDES:
Circuit Board:
P-CB-2x8(11 1/4 x9)
Heatsink:
(2 Piece) (9 1/4" x 4 1/4" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-2x8(Mobile & Base) & up
INCULDES:
Circuit Board:
P-CB-10 (12 1/4” x 9 1/8”)
Heatsink:
P-HS-M (9.25" x 5.886" x 1.270")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-24(Mobile & Base)
INCLUDES:
Circuit Board:
P-CB-12ST (19 1/4” x 13 5/16”)
Heatsink:
P-HS-L (1 Pieces)( 17 1/2" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-16(14 1/4" x 13 1/2" x 5 1/4")
INCULDES:
Circuit Board:
P-CB-16(13.312”x 13.312”)
Heatsink:
P-HS-M (9 1/4” x 5 3/8” x 1 3/8”)
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-32( 24 1/2" x 13 1/2" x 6")
INCULDES:
Circuit Board:
P-CB-16ST (23 1/4” x 13 3/8”)
Heatsink:
P-HS-L 17 1/2" x 5 3/8" x 1 3/8"
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-24 Mobile(20 1/2" x 13 1/2" x 5 1/4")
INCLUDES:
Circuit Board:
P-CB-24 Mobile (20 5/16" x 13 1/4")
Heatsink:
P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-24 Base(14 1/4" x 20 5/8" x 5 1/4")
INCLUDES:
Circuit Board:
P-CB-24 Base (20 5/16" x 13 1/4")
Heatsink:
P-HS-M (3 Pieces) (9 1/4" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in a C-DC-32( 24 1/2" x 13 1/2" x 6")
INCLUDES:
Circuit Board:
P-CB-32 (23 1/4" x 13 3/8") or P-CB-16ST-S (23 1/4" x 13 3/8")
Heatsink:
P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8" Each Piece)
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Fits in C-DC-32 Comp(27 1/4" x 15 1/4" x 6 1/4")
INCLUDES
Circuit Board:
P-CB-32Comp (24 3/4" x 15 1/4")
Heatsink:
P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8" Each Piece)
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled
Fits C-DC-48 Jumbo (23 1/4" x 26 13/16" x 6 1/4")
INCULDES
Circuit Board:
P-CB-48 Jumbo(26 3/4" x 22 3/16")
Heatsink:
P-HS-L (4 Pieces) (17 1/2" x 5 3/8" x 1 3/8")
4 Rows- 12 pill holes per row
3 Rows- 16 pill holes per row
