- All
- Newly Added Items
- Shipping Material
- Labels & Stickers
- AC Power Cords
- Alternators
- Antennas
- Board & Sink - BS Packs
- Bridge Rectifier
- Cabinets
- Cable
- Capacitors
- Ceramic Doorknob Capacitors
- CB Radios
- CBS Packs
- Chimney AC Teflon - TFE
- Circuit Board
- Circuit Breakers
- Coax Cable
- Combiners
- Connectors
- Copper End Plate
- Copper Lugs
- Diodes
- External Rectifier
- Fans & Fan Grill Guards
- Ferrite
- Field Strength Meter
- Fuse & Fuse Holders
- Gamma Rods
- Grommets & Strain Relief
- Ground Strap
- Hardware
- Heatsink
- Idler & Pulley
- Input-Output Chokes
- Insulators
- Knobs
- LEDs
- Meters & Shunts
- Miscellaneous Parts
- Modules
- Pill Strips & Power Strips
- Potentiometers
- Power Plugs
- Power Supplies
- Preamp
- Prototyping Boards
- Quick Disconnects
- Radio Covers
- Regulators
- Relays
- Remotes
- Resistors
- RF Chokes
- RF Transformer
- Rubber Feet
- Shrink Sleeve
- Soldering
- Solenoids
- Stryker Nitro Radio Knob
- Switches
- Terminals
- Thermal Insulator Pads-Mosfet
- Transformers
- Transistors
- Watt Meter Equipment
- Wire
- Zip Cord
Price is per pill strip
Please note-
*This item will ship separately from additional items ordered due to size.*
*This item might need extra shipping charges due to length*
*Please try to order when ordering a cabinet
Picture is for reference purposes only
Hardware package for the 30K Gamma
2" Capacitor Clamp to fit this item
Regulated Power Supply @ 14.5 volts
220v
Works with all devices that require 12-15 volts
Products building time estimated: 7-10 days( commonly on the shelf but not always guaranteed)
Picture is for reference purposes only
Products building time estimated: 3-7 days( commonly on the shelf but not always guaranteed)
Muitple Sizes Available
Bare Copper
Use Solder or Crimp Tool to install
Amperage Rating 20
Application Commercial
Assembly Screws Zinc Plated Steel
Blades/contacts Material Brass
Brand Leviton
Catalog Description 20 Amp, 125 Volt, Plug, Armored, Grounding, Steel
Environmental Conditions Flammability (Rated V-2 per UL94);Operating Temperature Range (-40 to +60 DEG C)
NEMA Rating-5-20P
Number Of Poles-2
Number of Wires-3
Picture is for reference purposes only
Plug Type: Grounding
Nema Type: 5-15P
Wires Poles: 2 Pole, 3 Wire
Voltage: 125 volts
UL Listed: Yes
CSA Listed: Yes
Number of Prongs: 3
Maximum Amperage: 15 amps
Picture is for reference purposes only
Amperage: 20 A
Current Interrupting: Certified for current interrupting at full rated current
Dielectric Voltage: Withstands 2000V per UL498
Grounding: Grounding
Pole: 2
Temperature Rise: Max 30C after 50 cycles OL at 150 percent rated current
Voltage: 250 VAC
Wire: 3
Picture is for reference purposes only
Amperage: 15 A
Current Interrupting: Certified for current interrupting at full rated current
Dielectric Voltage: Withstands 2000V per UL498
Grounding: Grounding
Pole: 2
Temperature Rise: Max 30C after 50 cycles OL at 150 percent rated current
Voltage: 250 VAC
Wire: 3
Picture is for reference purposes only
• 5/16" Fiberglass Whips
• Top Loaded 1/4 Wave Helically Wound Whip Antenna
• 1000 Watt Power Rated
• 20 Gauge Copper Wire • Factory Tuned - Field Adjustable
• 3-Way Aluminum Mirror Mount with All Brass SO-239 Connector
• 9 Foot Low Loss RG58 or RG59 Coaxial with Molded PL259 Connectors - Soldered Connection
• Display Packaged
These are Blue in color
Metal Oxide Film Resistors
Picture is for reference purposes only
PRO TRUCKER 3 PIN POWER CORD
3 PIN
16 Gauge
Inline-Fuse
12 Gauge for high out put radios
110V
USED
Connector for 217 Coax
UHF Male connector
Picture is for reference purposes only
Actual Product May Vary
Hardware package for the 20K Gamma
50mV
Picture is for reference purposes only
Actual Product May Vary
Shunts are required for meters to work
Picture is for reference purposes only
Actual Product May Vary
St-Miro Original
8 Watt - Not China Made
Handles 200 Amps Continuous And 300 Amp Surges.
Durable Weatherproof Construction.
A Must For Multi Battery Sytems.
Allows For Longer Battery Life And Control Over Which Battery Is Being Used.
Great For Isolating Second Battery In Boats Making It Dedicated Only To The Stereo System.
Keeps Primary Starting From Being Drained.
MADE BY INSTALL BAY
Computer grade clamps
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes 120mm Fans
Nylon Grommet: 2653(Fits Original drilled hole)
INCLUDES:
Cabinet: C-DC-2×8 Base (14 1/4" x 20 5/8" x 5 3/4")
Circuit Board: P-CB-2x6 (11 1/4" x 7 5/8")
Heatsink:P-HS-8 (1 Piece) (9 1/2" x 6 1/5” x 1 5/16")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
Size (OD of Core x Length of Core): 2 3/8" x 1 "
Power: 12000 W
Gauge: 10 Ga
Wraps: 5 Wraps
Picture is for reference purposes only
Actual product may vary
Size (OD of Core x Length of Core): 2 3/8" x 1/2"
Power: 7500 W
Gauge: 10 Ga
Wraps: 5 Wraps
Picture is for reference purposes only
Actual Product may Vary
Size (OD of Core x Length of Core): 1 3/8" x 1/2"
Power: 6000 W
Gauge: 12 Ga
Wraps: 5 Wraps
Picture is for Reference Purposes only
Actual Product May Vary
Size (OD of Core x Length of Core): 1.125" x 0.545"
Power: 4000 W
Gauge: 16 Ga
Wraps: 5 Wraps
Picture is for reference purposes only
Actual Product may Vary
Size (OD of Core x Length of Core): 0.817" x 1/2"
Power: 2800 W
Gauge: 16 Ga
Wraps: 5 Wraps
Picture is for reference purposes only
Actual Product May Vary
Size (OD of Core x Length of Core): 0.817" x 1/4"
Power: 1200 W
Gauge: 16 Ga
Wraps: 5 Wraps
Picture is for reference purposes only
Actual Product may Vary
Size (OD of Core x Length of Core): 1/2" x 1/2"
Power: 400 W
Gauge: 20 Ga
Wraps: 3 Wraps
Picture is for reference purposes only
Actual Product may vary
High grade ferrite
16 gauge wire.
Pictures are for references purposes only
Actual product may vary
3A
Price is her diode
Picture is for reference purposes only
Actual Product May Vary
Fast Recovery Rectifiers
Max Surge Current:30 A
Price Per Diode
Picture is for reference purposes only
Actual Product May Vary
25mA
Price is per diode
Picture is for reference purposes only
Actual Product May Vary
**PRICE IS PER FOOT**
Automotive Zip Cord Red/Black
Colors: RED & BLACK
No. of Cond.: 2
Picture is for reference purposes only
Black Phenolic Skirted knob with White line Indicator, brass insert and Spun Aluminum Inlay.
Brass Core
6 mm shaft size
Set Screws: Single
Picture is for reference purposes only
1-3/4" Black Skirted, 1/4 Shaft Knobs
Black Phenolic Skirted knob with White line Indicator, brass insert and Spun Aluminum Inlay.
Diameter: 1-3/4"
Shaft Size: 1/4"
Height: 5/8"
Set Screws: Single
Picture is for reference purposes only
Product sold in 12” length.
Recommended for 22-24-26 gauge wire.
Shrink sleeve is folded up to accommodate shipping
Sold in 12” sections
Recommended for 10-12 gauge wire
Shrink sleeve is folded up to accommodate shipping
Sold in 12” pieces
Recommended for 4-6-8 gauge wire
Shrink sleeve is folded up to accommodate shipping
Color: Black
This item is sold in 12” sections
Recommended for 4, 2, 0 gauge
Shrink sleeve is folded up to accommodate shipping
1/4” Aux plug
Picture is for reference purposes only
Actual Product May Vary
10 Ohm- 100pck
1K Ohm- 100 pck
FEATURES:
• : Temperature Range -55°C ~ +155°C • ±5% tolerance
• : High quality performance at economical prices
• : Compatible with automatic insertion equipment
• : Flame retardant type available
• : Tin coated annealed copper wire
Multiple Sizes available
Bare Copper
Crimp or Solder to install
Multiple sizes available
Bare Copper
Can Use Solder or Crimp Tool to install
Multiple sizes available
Bare Copper
Can use Solder or Crimp Tool to install
Available in Type 43,Type 61, and Type 67
Picture is for reference Purposes only
Actual Product May Vary
Type 43 & Type 61 Available
Picture is for reference purposes only
Actual Product May Vary
Type 61 Only
Picture is for reference purposes only
Actual Product May Vary
This push button circuit breaker be used in marine, cars, trucks, buses, portable generators and other applications.
Meets UL standard 1077 and CSA C22.2 No. 5.1-M91a.
RoHS Compliant
Current Rating: 2A
No. of Poles: 1 Pole
Voltage Rating VDC: 32VDC
Voltage Rating VAC: 250VAC
Circuit Breaker Mounting: Pane
10Ohm - 100 pck
1kOhm - 100 pck
FEATURES
• Temperature Range -55°C ~ +155°C
• ±5% tolerance • High quality performance at economical prices • Compatible with automatic insertion equipment
• Flame retardant type available
• Tin coated annealed copper wire
Pictures are for reference purposes only
Actual Product Color May Vary
10 KW Gammas
Teflon Insulated
Universal Fits Most Antenna Base Station Beams
Stainless Steel Hardware Included
Approx 20-75pF
2x8 Base Cabinet (14 1/4" x 20 5/8" x 5 3/4"):
Board & Sink (BS) - 10
This unit utilizes 120mm Fans
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Variable Control- 12.5- 15.5 volts
Switching Power Supply
110v
Dimensions: 9 1/8" x 13 1/2" x 6 1/2 " For 100 Amp Power Supply
Will maintain on average 12-16V
Floats at 19-20V
Non-Regulated 110V
Picture is for reference purposes only
150 & 200 Amp Regulated Power Supply
Great for Automotive Shops
Can Be used as Battery Charger
13.8 VDC
Digital Voltmeter / AMP Meter
Cooling Fan Inside 110VAC
Made with Highest Quality New Parts
15' SOOW Cord
250A-
Digital Volt Meter:
Regulated Power Supply @ Approx. 14.5 volts 220v:
Works with all devices that require 12-15 volts:
Regulated Power Supply @ 14.5 volts 220v
Products building time estimated: 3-7 days( commonly on the shelf but not always guaranteed)
Picture is for reference purposes only
Special ordered Cabinets can take up to a week for shipping.
Variable Control- 12.5- 15.5 volts
Switching Power Supply
Works with all radios
110v or 220v
When purchasing the 110VAC 200 Amp Power Supply, make sure you have the proper set up for it. This product requires 20 Amp service, and a minimum of 12AWG wire running to the receptacle
250 amp:
Digital Volt Meter:
Regulated Power Supply @ Approx. 14.5 volts 220v:
Works with all devices that require 12-15 volts:
Regulated Power Supply @ 14.5 volts 220v
Pictures are for reference purposes only
Products building time estimated: 3-7 days( commonly on the shelf but not always guaranteed)
300-450 Amp Regulated Power Supply with Variable
Variable Control- 12.5- 15.5 volts
Switching Power Supply
Works with all radios
220v
Picture is for reference purposes only
Products building time estimated: 3-7 days( commonly on the shelf but not always guaranteed)
400 AMP and above will be in AC-PS-4 OR LARGER
Will maintain on average 13-15V
Floats at 18V
Non-Regulated 110V
Picture is for reference purposes only
Runs 150-200 amps
Can run a 6 pill through a 2x8
Voltage meter built in , along with a breaker and regulated fans
Non-Regulated
Available in 110V or 220V
Picture is for reference purposes only
Digital Volt Meter:
Regulated Power Supply @ Approx. 14.5 volts 110v:
Works with all devices that require 12-15 volts:
NOTE: When purchasing the 110VAC 200 Amp Power Supply, make sure you have the proper set up for it. This product requires 30 Amp service, and a minimum of 12AWG wire running to the receptacle.
110V
Step Down to 12 to 16 Volts
USED
Shunts Are Required For Meters To Work
Picture is for reference purposes only
Actual Product May Vary
Shunts Are Required For Meters To Work
Picture is for reference purposes only
Actual Product May Vary
50mV
Picture is for reference purposes only
Actual Product May Vary
12 VDC
240VAC
Picture is for reference purposes only
12 VDC
Picture is for reference purposes only
12000 MFD
25 VDC
Max Surge 30 VDC.
1.5" Clamp not inculded
32D 140000-15vdc
D48603
10 Amps
0.1uF 100nF High-voltage
125/250VAC
10AWG/SCC
AS22759/4
Specifications: (subject to change without notice)
AWG Size 10
Conductor Stranding 37/26
No. of Strands 37
Strand Size 26
Approx LBS/MFT41.5Min O.D. (in)0.159Max O.D. (in)0.171M27500
Component RB Mil-SpecM22759/4SAE SpecAS22759/4
Cond. Material Silver-Coated Copper Insul.
Material Fluorinated Ethylene Propylene (FEP)
Jacket Material Polytetrafluoroethylene (PTFE)
Max. Temp 200°C Shield Impregnated Glass Braid
Hardware package for the 10K Gamma rod
120mm x 120mm x 38mm
1.5" depth
24 VDC
Picture is for referene purposes only
Actual Product May Vary
1.5" in Depth
120mm = 4 5/8"
120mm x 120mm x 38mm Fan - 220VAC
Picture is for reference purposes only
Actual Product May Vary
Bridge Rectifier 1600V
large over-current capacity and low voltage drop.
High quality bridge rectifiers used for conversion of an alternating current input into a direct current output.
Picture is for reference purposes only
Actual Product May Vary
