- All
- Newly Added Items
- Shipping Material
- Labels & Stickers
- AC Power Cords
- Alternators
- Antennas
- Board & Sink - BS Packs
- Bridge Rectifier
- Cabinets
- Cable
- Capacitors
- Ceramic Doorknob Capacitors
- CB Radios
- CBS Packs
- Chimney AC Teflon - TFE
- Circuit Board
- Circuit Breakers
- Coax Cable
- Combiners
- Connectors
- Copper End Plate
- Copper Lugs
- Diodes
- External Rectifier
- Fans & Fan Grill Guards
- Ferrite
- Field Strength Meter
- Fuse & Fuse Holders
- Gamma Rods
- Grommets & Strain Relief
- Ground Strap
- Hardware
- Heatsink
- Idler & Pulley
- Input-Output Chokes
- Insulators
- Knobs
- LEDs
- Meters & Shunts
- Miscellaneous Parts
- Modules
- Pill Strips & Power Strips
- Potentiometers
- Power Plugs
- Power Supplies
- Preamp
- Prototyping Boards
- Quick Disconnects
- Radio Covers
- Regulators
- Relays
- Remotes
- Resistors
- RF Chokes
- RF Transformer
- Rubber Feet
- Shrink Sleeve
- Soldering
- Solenoids
- Stryker Nitro Radio Knob
- Switches
- Terminals
- Thermal Insulator Pads-Mosfet
- Transformers
- Transistors
- Watt Meter Equipment
- Wire
- Zip Cord
Can be purchased with lip or lipless
Sizes available:
1/2”
3/8”
5/16”
Picture is for reference purposes only
Bird 43
Wattmeter Element Line Section Connector
Picture is for Reference Purposes only
Allows 2080-002 meter to be remotely operated from Directional Couplers
Picture is for reference purposes only
Actual product may vary
Available in black or gold.
Dimensions- W5 3/8 x L9 1/16 x H 1 3/8
Available in black or gold
Dimensions: 4 1/4 x 5 7/8 x 1 1/4
Bore: 6mm to 6.35mm (1/4 inch)
O/D: 18mm
6mm one end to 6.35mm (1/4") other end, flexible shaft coupling with helical cut aluminum body and dual set screws in each end .
Dia: 18mm L: 25mm WT: .04
Picture is for reference purposes only
Actual Product May Vary
Comp Trucker
Length with whip: 6.5'
Top Shaft: 12"
Bottom Shaft: 12"
Coil: 1/2" Thick, 6 Wraps, 4" Diameter
Delrin: 1" x 6"
1" Tubing 6061 Aluminum• Total Length with included whip: 6.5'
48" whip included.
Extra shipping chargers may occur.
Replacement Quick Disconnect Parts
Makes Connecting and Disconnecting Extremely Simple
Use For Those Extra Antennas
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Cord and Socket is to be purchases seperately*
Clear Coated
Nylon Grommet: ( orignally filled hole)
Cabinet Dimensions: (12×7 7/8 × 5 1/4)
XL Cabinet Dimensions:(12 5/8 × 10 5/8 × 5 3/8)
Fits:
Circuit Board:
P-CB-1x2 (6 13/16" x 4")
P-CB-4 Base
Heatsink:
P-HS-3 (1 Piece) (3 1/2" x 5 3/8" x 1 3/8")
Variable From .5 To 15+ Watts RMS ( Bird Model 43 No PEP Kit ) --Low end is adjustable from inside the radio.
15+ Watts PEP True Forward Power ( Bird Model 43 No PEP Kit )120% Modulation With No Drop Off --Tested With A 1khz Tone @ 1 Minute ( Hickok Analyzer )Added: Heatsink On Audio IC ( Thermasink Heatsink - Cools Audio IC )10,000uf 25volt Electrolytic Capacitor on DC Jack (Filters DC Line )Every Radio goes through a full realignment of the PLL, VCO, Receiver and Meter adjustment. Tested on 2 different work stations.
Made to order
SWR Calibration - Allows calibration of antenna system for maximum performance.
Antenna Warning Indicator - Illuminates when antenna needs checking.
4 Watts Power Output - Maximum power allowed by law for extended range of communication.
Instant Channel 9 - Immediate access to emergency channel 9.
40 CB Channels - Full channel coverage
Please be sure to choose the proper dimension.
Custom Made out of TFE (high grade of Teflon)
Can be trimmed to shorting the length
Intended for steel tube usage
Dimensions:
9 3/8" OD x 8.400" ID x 6" (Made for 3cx20000)
8 1/4" OD x 7.400" ID x 6" (Made for 3cx15000) & 3cx10000
8 .50" OD x 7.100" ID x 6"
7 1/4" OD x 6.175" ID x 6" (Made for 3cx6000)
7 1/4" OD x 6.175" ID x 4" (Made for 3cx5000)
5" OD X 4.175" ID x 3.80" (Made for 3cx3000)
TEFLON PRICES CHANGE WEEKLY
*Customer is responsible for measuring their own equipment to determine the correct size that is needed.
*If the customer needs to return the incorrect part due to improper measuring, the customer is responsible for return shipping and also a 10% restocking fee.
Please measure correctly.
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
DOES NOT HAVE A FAN
Nylon Grommet:
Snap in plug:
1/4 remote hole
INCLUDES:
DC Cabinet: C-DC-2 (6 1/2" x 3 3/4" x 3 1/8")
Circuit Board: P-CB-2 (5" x 3 3/8")
Heatsink: P-HS-2 (1 Piece) (2 1/2" x 4 1/4" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Utilizes one 92mm fan
Nylon Grommets: 5008( Fits Original Drilled Hole)
Nickle-Plated Snap-in Plug: 3/8" Dia
1/4 remote hole
Dimensions:
Cabinet: C-DC-3(7 1/2" x 5" x 4")
Circuit Board:C-PB-2 pill extended (6 13/16" x 4")
Heatsink: P-HS-3 (1 Piece) (3 1/4" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Utilizes a 92.5mm fan & grill
Nylon Grommets: 5008( Fits original drilled hole)
3/8" Dia Nickle-Plated Snap-in Plug
1/4 remote hole
INCLUDES:
DC Cabinet: C-DC-3 (7 1/2" x 5" x 4")
Circuit Board: P-CB-1x2 (6 13/16" x 4")
Heatsink: P-HS-3 (1 Piece) (3 1/4" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options are available
Utilizes one 80mm fan
Nylon Grommet: 5008(Fits original drilled hole)
1/4 remote hole
INCLUDES:
DC Cabinet: C-DC-4 Mobile (6 3/8" x 5 1/4" x 4")
Circuit Board: P-CB-4 Mobile (6 3/16" x 4 1/2")
Heatsink: P-HS-3 (1 Piece) (3 1/2" x 5 3/8" x 1 3/8")
Photos are for reference only
Reference photo display a clear coat cabinet
*Screws Not Included - Screws can be purchased from our "Hardware" section
Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled
Utilizes one 80mm fan
Nylon Grommet: 5008 or 5010 (Fits Original Drilled Hole)
INCULDED:
Cabinet: C-DC-4.5 (7 1/4 x 6 3/8 x 4)
Circuit Board: P-CB-4.5( 6 1/2” x 6 7/16”)
Heatsink: P-HS-3(5 3/8” x 3 1/2”)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
This unit utilizes one 120mm Fan
Nylon Grommet:5010 (Fits Original Drilled Hole)
INCLUDES:
DC Cabinet: C-DC-5 (11" x 6 3/8" x 4")
Circuit Board: P-CB-2x4 (10 1/4" x 6 1/2")
Heatsink: P-HS-5 (1 Piece) (8 1/4" x 5 3/8" x 1 3/8")
Picture is for reference purposes only
The cabinet in the photos is clear coated
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes one 120mm Fan
Nylon Grommet: 5008( Fits Original Drilled Hole)
INCLUDES:
Cabinet: C-DC-6 (12" x 7 3/4" x 5 1/4")
Circuit Board: P-CB-2x4L (11 1/4" x 7 5/8")
Heatsink: P-HS-M (1 Piece) (9 1/4" x 5 3/8" x 1 3/8")
Photo is for refernece purposes only
Photos display a clear coated cabinet
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes two 120mm Fan
Nylon Grommets: 5017 or 2653( Fits Original Drilled Hole)
INCLUDES:
Cabinet: C-DC-5.5 Base (14 1/4" x 13 1/2" x 5 1/4")
Circuit Board: P-CB-2x4 (10 1/4" x 6 1/2")
Heatsink: P-HS-5 (1 Piece) (8 1/4" x 5 3/8" x 1 3/8")
Photos are for reference purposes only
photos display a clear coated cabinet
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
This unit utilizes one 120mm fan
Nylon Grommet:5008(Fits original drilled hole)
INCLUDES:
Cabinet: C-DC-6 (12" x 7 3/4" x 5 1/4")
Circuit Board: P-CB-2×4L (10.25” x 6.187”)
Heatsink:P-HS-5 (8 1/2 x 5 3/8” x 1 3/8”)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section*
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
This unit utilizes one 120mm fan
Nylon Grommet:5008 (Fits Original Drilled Hole)
INCLUDES:
Cabinet: C-DC-6 (12" x 7 3/4" x 5 1/4")
Circuit Board: P-CB-2x6 (11 1/4" x 7 5/8")
Heatsink: (1 Piece) (9 1/2" x 5.888" x 1 5/16")
Photos are for reference purposes only
Displayed in the pictures is a clear coated cabinet
*Screws Not Included - Screws can be purchased from our "Hardware" section
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes one 120mm Fan
Nylon Grommet:5008(Fits original drilled hole)
INCULDES:
Cabinet:C-DC-6 (12x 7.75 x 5.25)
Circuit Board: P-CB -8S (11.25” x 7.625”)
Heatsink: P-HS-M (9 1/4 x 5 3/8 x 1 3/8)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
This unit utilizes two 120mm fans
Nylon Grommet: 5017 or 2654(Fits Originally drilled hole)
INCLUDES:
DC Cabinet: C-DC-2x8 (12 7/8" x9 1/4" x 5 1/4")
Circuit Board: P-CB-2x8 (11 1/4" x 9")
Heatsink: P-HS-2x8 (2 Piece) (9 1/2" x 4" x 1 5/16")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This Unit utilizes two 120mm fans
Nylon Grommet:2653(Fits Original drilled hole)
INCLUDES:
DC Cabinet: C-DC-2x8
Circuit Board: P-CB-10 (11 1/4" x 9")
Heatsink: P-HS-M(1 Piece) (9.25" x 5 .88" x 1 .270")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes four 120mm fans
Nylon Grommet:
INCLUDES:
DC Cabinet: C-DC-24 Mobile (20 1/2" x 13 1/2" x 5 1/4")
Circuit Board: P-CB-12ST(19 1/4" x 13 5/16")
Heatsink: P-HS-L (1 Pieces)- 17 1/2" x 5 3/8" x 1 3/8"
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This utilizes four 120mm fans
Nylon Grommet: 2653 or 2656 (Original Drilled Hole)
INCLUDES:
Cabinet: C-DC-16 (14 1/4" x 13 1/2" x 5 1/4")
Circuit Board: P-CB-16 OR P-CB-8 Large
Heatsink: P-HS-M (2 Pieces) (9 1/4" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
this unit utilizes six 120mm fans
Nylon Grommet:
INCLUDES:
DC Cabinet: C-DC-32 (24 1/2" x 13 1/2" x 6")
Circuit Board: P-CB-16ST-S (23 1/4" x 13 3/8")
Heatsink: P-HS-L (1 Piece) (17 1/2" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This Unit utilizes four 120mm fans
Nylon Grommet:
INCLUDES:
DC Cabinet: C-DC-24 Mobile (20 1/2" x 13 1/2" x 5 1/4")
Circuit Board: P-CB-24 Mobile (19 1/4" x 13 5/16")
Heatsink: P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
Additional shipping costs may apply
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes six 120mm fans
Nylon Grommet:
INCLUDES:
DC Cabinet: C-DC-24 Base (14 1/4" x 20 5/8" x 5 3/4")
Circuit Board: P-CB-24 Base (20 5/16" x 13 1/4")
Heatsink: P-HS-M (3 Pieces) (9 1/4" x 5 3/8" x 1 3/8")
Additional shipping costs may apply
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.*
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes six 120mm fans
Nylon Grommet: 2652(Original drilled hole)
INCLUDES:
DC Cabinet: C-DC-32 (24 1/2" x 13 1/2" x 6")
Circuit Board: P-CB-32 (23 1/4" x 13 3/8") or P-CB-16ST-S (23 1/4" x 13 3/8")
Heatsink: P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8" Each Piece)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
Additional shipping costs may apply
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This Unit utilizes four 120mm fans
Nylon Grommet:
INCLUDES:
DC Cabinet: C-DC-64 Jumbo (26 1/4" x 26 13/16" x 5 1/4")
Circuit Board: P-CB-64 Jumbo (26 3/4" x 25 3/16")
Heatsink: P-HS-L (4 Pieces) (17 1/2" x 5 3/8" x 1 3/8" Each Piece)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
Additional shipping cost may apply
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes four 120mm fans
Nylon Grommet:
INCLUDES:
DC Cabinet: C-DC-48 Jumbo (23 1/4" x 26 13/16" x 6 1/4")
Circuit Board: P-CB-48 Jumbo (26 3/4" x 22 3/16")
Heatsink: P-HS-L (4 Pieces) (17 1/2" x 7 1/4" x 1 3/8" Each Piece)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
Additional shipping costs may apply
Dimensions: 6 3/8" x 5 3/8" x 1 3/8"
Fits:
Circuit Board: P-CB-4.5(6 1/8 x 6 1/2)
Cabinet: C-DC-4.5 mobile (7 1/4" x 6 1/2" x 4 1/8")
Capacitance: 150 pF
Tolerance: 5 %
Voltage Rating: 3 KVolts
Termination Style: Radial
Product: High Voltage Ceramic Disc Capacitors
Lead Spacing: 6.35 mmCapacitance: 120 pF
Tolerance: 5 %
Voltage Rating: 3 KVolts
Termination Style: Radial
Product: High Voltage Ceramic Disc Capacitors
Lead Spacing: 6.35 mm
Picture is for reference purposes only
Capacitance: 15 pF
Tolerance: 5%
Voltage Rating: 100 Volts
Operating Temperature Range: -55C to +85C
Termination Style: Radial
Dimensions: 5 mm Diameter
Lead Spacing: 2.5 mm
Capacitance: 0.1µF
Tolerance: ±20%
Voltage: 25V
Operating temp: +10°C to +85°C
Size: 5mm Dia.
This is a larger capacitor.
Capacitance: 0.1 uF
Tolerance: - 20 %, + 80 %
Voltage Rating: 50Volts
Operating Temperature Range: - 25 C to + 85 C
Termination Style: Radial
Dimensions: 12 mm Dia.
Lead Spacing: 9.5 mm
Value: 4.7 UF
Voltage: 35V & 50V
Value: 47 uF
Voltage: 50
Value: 470 uF
Voltage: 25V & 35V
Value: 4700 uF
Voltage: 50 vdc
Value: 330 uF
Voltage: 16V
Value: 3300 uF
Voltage: 50
Value: 22 uF
Voltage: 35V
Value: 220 uF
Voltage: 16V & 25V
Value: 2200 uF
Voltage: 50v
Value: 100 uF
Voltage: 50V
Value: 100 uF
Voltage: 450V
Value: 1000 uF
Voltage: 25v
Value: 10 uF
Voltage: 25V & 35V
25 VDC
2.5'' TALL
1.375'' O.D.
1.5" Computer Grade Capacitor (not included)
25 VDC
4.5'' TALL
1.5'' O.D.
1.5 " Capacitor Clamp(not inculded)
Made in U.S.A
2500MFD
Max surge: 100vdc
Made in U.S.A
25V
36D Series
Height: 110mm
Diameter: 35mm
Terminal Spacing: 12.7mm
1.5" Computer Grade Capacitor Clamp
*Screws Not Included - Screws can be purchased from our "Hardware" section.*
Coating: Silver Finish
Cabinet Dimensions: 4 1/8" x 3" x 1 5/8"
Cabinet Thickness: .063
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Coating: Silver Finish
Cabinet Dimensions: 4 1/8" L x 3" W x 1 1/2" H
Cabinet Thickness: .063
Rubber Grommet: 5106 ( Single Back Hole)
Bracket included in purchase
Four hole in the front typically used for LED Holders & LED Lights or Switches
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Coating: Clear Coat
Cabinet Dimensions: 14 1/4" x 13 1/2" x 5 1/4"
Cabinet Thickness: .063
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Coating:
Cabinet Dimensions: 4" x 6 1/8" x 3 1/4"
Window Dimensions: L: 3 5/16" x W: 1 5/8"
Cabinet Thickness: .063
*Screws Not Included - Screws can be purchased from our "Hardware" section
Coating: Silver Finish
Cabinet Dimensions: 5 1/8" x 3" x 1 7/8"
Cabinet Thickness: .063
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Coating: Silver Finish
Cabinet Dimensions: 4" x 6 1/8" x 3 1/4"
Cabinet Thickness: .063
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Coating Options Available
Cabinet Dimensions: 9 1/8" x 13 1/2" x 6 1/2 "
Thickness: .090"
Fan Hole Size: 92mm
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Clear Coated
Cabinet Dimensions: 18" x 22 3/8" x 14 1/8"
Thickness: .090"
Typically used for 500-900 Amp Power Supply
*Exceptionally thick, intended for heavy transformers.
Additional shipping charges may apply
Screws Not Included - Screws can be purchased from our "Hardware" section*
Coating Options Available
Nylon Grommet: 5008( Fits original drilled hole)
DOES NOT HAVE A FAN
Cabinet Dimensions:
6 1/2" x 3 3/4" x 3 1/8"
Fits:
Circuit Board:
P-CB-2 (5" x 3 3/8")
Heatsink:
P-HS-2 (1 Piece) (2 1/2" x 4 1/4" x 1 3/8")
Screws Not Included - Screws can be purchased from our "Hardware" section*
Coating Options Available
Nylon Grommet: 5008 or 5010 ( Fits original drilled hole)
This unit utilizes One 92 mm fan.
Cabinet Dimensions:
7 1/2" x 5" x 4"
Fits:
Circuit Board:
P-CB-1x2 (6 13/16" x 4")
Heatsink:
P-HS-3 (1 Piece) (3 1/4" x 5 3/8" x 1 3/8")
Screws Not Included - Screws can be purchased from our "Hardware" section*
Coating Options Available
Nylon Grommet: 5008 or 5010 (Fits Original Drilled Hole)
This unit utilizes One 80mm Fan
Cabinet Dimensions:
6 3/8" x 5 1/4" x 3 3/8"
Fits:
Circuit Board:
P-CB-4 Mobile (6 3/16" x 4 1/2")
Heatsink:
P-HS-3 (1 Piece) (3 1/2" x 5 3/8" x 1 3/8")
Screws Not Included - Screws can be purchased from our "Hardware" section*
Clear Coated
Nylon Grommet: 5008 or 5010 (Fits Original Drilled Hole)
This unit utilizes one 80mm Fan
Cabinet Dimensions:
7 1/4" x 6 1/2" x 4 1/8"
Fits:
Board & Sink-4.5
Circuit Board:
P-CB-4.5 (6 1/8 x 6 1/2)
Heatsink:
P-HS-4.5 (5 1/2 x 3 5/8)
*Screws Not Included - Screws can be purchased from our "Hardware" section*
Coating Options Available
Nylon Grommet: 5010 (Fits Original Drilled Hole)
This Unit Utilizes One 120mm Fan
Cabinet Dimensions:
11" x 6 3/8" x 4"
Fits:
Circuit Boards:
P-CB-2x4 (10 1/4" x 6 1/2")
P-CB-6ST (10 1/4" x 6 3/16")
Heatsink:
P-HS-5 (1 Piece) (8 1/2" x 5 3/8" x 1 3/8")
Screws Not Included - Screws can be purchased from our "Hardware" section.*
Clear Coated
Nylon Grommets: 5017 or 2653 ( Fits Orginally Drilled Hole)
This unit utilizes two 120mm Fans
Cabinet Dimensions:
14 1/4" x 13 1/2" x 5 1/4"
Fits:
Circuit Board:
P-CB-2×4 (10 1/4" x 6 1/4")
Heatsink:
P-HS-5(8 1/4" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.*
Coating Options Available
Nylon Grommet: 5008 (Fits Original Drilled Hole)
This unit utilizes one 120mm Fan
Cabinet Dimensions:
12" x 7 3/4" x 5 1/4"
Fits:
Circuit Boards:
P-CB-2x4L (11 1/4" x 7 5/8")
P-CB-2x6 (11 1/4" x 7 5/8")
P-CB-8 (11 1/4" x 7 5/8")
Heatsink:
P-HS-8 (1 Piece) (9 1/2" x 6 1/5" x 1 5/16")
P-HS-M (1 Piece) (9 1/4" x 5 3/8" x 1 3/8")
Open vent for air flow
*Screws Not Included - Screws can be purchased from our "Hardware" section.*
Coating Options Available
Nylon Grommets: 2653 or 2656 (Original Drilled Hole)
This unit utilizes Four 120mm Fans
Cabinet Dimensions:
14 1/4" x 13 1/2" x 5 1/4"
Fits:
Circuit Board:
P-CB-16(13.312 x 13.312)
Heatsink:
P-HS-M (2 Pieces) (9 1/4" x 5 3/8" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Clear Coated
Nylon Grommet: 2652 ( Original drilled hole )
This unit utilizes six 120mm Fans
Cabinet Dimensions:
20 1/2" x 13 1/2" x 5 1/4"
Fits:
Circuit Board:
P-CB-24M - 19.25”x 13.312”
Heatsink:
P-HS-L(2)-17 1/2 x 5 3/8 x 1 3/8
Additional shipping charges may apply
*Screws Not Included - Screws can be purchased from our "Hardware" section.*
Clear Coated
Nylon Grommet: 2652 (Original Drilled holes)
This unit utilizes six 120mm Fans
Cabinet Dimensions:
14 1/4" x 20 5/8" x 5 1/4"
Heavy Duty:
14 1/4” x 20 5/8” x 6 x ¼
Fits:
Circuit Board:
P-CB-24 Base (20 5/16" x 13 1/4")
Heatsink:
P-HS-M (3 Pieces) (9 1/4" x 5 3/8" x 1 3/8")
Additional shipping charges may apply
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Clear Coated
Nylon Grommet:
This unit utilizes six 120mm Fans
Cabinet Dimensions:
24 1/2" x 13 1/2" x 6"
Fits:
Circuit Boards:
P-CB-32 (23 1/4" x 13 3/8")
P-CB-16ST-S (23 1/4" x 13 3/8")
Heatsink:
P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8" Each Piece)
Additional shipping charges may apply
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Clear Coated
Nylon Grommet:
This unit utilizes four 120mm Fans
Cabinet Dimensions:
27" X 23.25" X 6.25"
Fits:
Circuit Board:
P-CB-48 Jumbo (26 3/4" x 22 3/16")
Heatsink:
P-HS-L (4 Pieces) (17 1/2" x 5 3/8" x 1 3/8")
Additional shipping charges may apply
This is open for orders but will take 2 weeks to ship from date of order
The price on this cabinet is subject to change without notice
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Clear Coated
Nylon Grommet:
This unit utilizes six 120mm Fans
Cabinet Dimensions:
23.25" X 27" X 5.25"
Fits:
Board & Sink- 64
Circuit Board:
P-CB-64 -(26 3/4" x 22 1/4")
Heatsink:
P-HS-L (4 pieces)(17 1/2" x 5 3/8" x 1 3/8")
Additional shipping charges may apply
This is open for orders but may take 2 weeks to ship from date of order
The price on this cabinet is subject to change with notice
Screws Not Included - Screws can be purchased from our "Hardware" section.*
Clear Coated
Nylon Grommet:
This unit utilizes 120mm Fans
Cabinet Dimensions:
26.5" X 26.812" X 5.25"
Fits:
Circuit Board:
P-CB- 64 Jumbo(26 3/4" x 25 3/16")
Heatsink:
P-HS-L (4 Pieces) (17 1/2" x 5 3/8" x 1 3/8")
Additional shipping charges may apply
This is open for orders but will take 2 weeks to ship from date of order
The price on this cabinet is subject to change with notice
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Coating: Silver Finish
Cabinet Dimensions: 24" High x 18" Wide x 18" Long
Side Thickness: .060
Lid Thickness: .060
Floor Thickness: .125
Shelf Thickness: .090
Base 1/8" thick (made for caster wheels ) THIS IS MADE TO HOLD IRON CORE TRANSFORMERS
This Cabinet is made so the PS-2 will sit on top
The Front panel is not shone in pictures but there is a front
Additional shipping charges may apply when multiples of this item are purchased
